MB Trac 1300 on Unimog frame - Druckversion

+- Das MB-trac Forum (https://www.trac-technik.de/Forum)
+-- Forum: Rund um den MB-trac (https://www.trac-technik.de/Forum/forumdisplay.php?fid=1)
+--- Forum: MB-trac Forum (https://www.trac-technik.de/Forum/forumdisplay.php?fid=2)
+--- Thema: MB Trac 1300 on Unimog frame (/showthread.php?tid=21398)

---

MB Trac 1300 on Unimog frame - MercedesW124 - 30.05.2013

Hello.

Is it possible to put a MB Trac 1300 on a Mercedes-Benz Unimog 406 frame?

---

RE: MB Trac 1300 on Unimog frame - super schlepper - 30.05.2013

I dont`t think that this is possible, cause the MB trac frame is not the
same building like the frame of the unimog 406.
http://www.buntbahn.de/fotos/data/7666/3429unimog06.JPG << is from
an RC model but the real frame looks similar and the trac frame of the
443 looks more like this one: https://www.trac-technik.de/Forum/attachment.php?aid=10718
gruß stefan

---

RE: MB Trac 1300 on Unimog frame - MercedesW124 - 31.05.2013

Is there a Unimog frame that can fit?

---

RE: MB Trac 1300 on Unimog frame - super schlepper - 31.05.2013

I don`t think so but I`m not a specialist for Unimog.
gruß stefan

---

RE: MB Trac 1300 on Unimog frame - optimog - 31.05.2013

There is one known hybreed between a Unimog U416 Chassis and MB trac 1000 hood and cabine. this was built by Unimog Dealer Krafft & Co.

please check picture on
https://www.trac-technik.de/Forum/showthread.php?tid=13177&pid=86189#pid86189
edited by Hartmut on 20.02.2011.

normaly the Unimog frame witdth is much wider than the trac one.
The trac needs a narrow frame due too the bigger tires and necessary steering angle.

best regards

---